
M’150 S Cocotte with Lid 18 cm
R10 260.00 Inc VAT
The same 1.5 mm copper body as M’150 B, finished with cast stainless steel handles — cooler in the hand and quieter against a modern kitchen.
Dimensions
| Piece | Diameter | Height | Capacity | Oven |
|---|---|---|---|---|
| 613119 | 18 cm | — | — | Fits a standard 600 mm oven (body only — allow for the handle on long-handled pans) |
Figures are Mauviel1830’s own, from the 2026 manufacturer catalogue. Capacity is to the brim, not to a working level.
Construction and materials
| Construction | 90% copper bonded to 10% 18/10 stainless steel |
|---|---|
| Material thickness | 1.5 mm |
| Cooking surface | 18/10 stainless steel |
| Exterior finish | Polished copper, straight edge |
| Handles | Cast stainless steel |
| Heat sources | Gas, Electric, Ceramic, Halogen, Oven. Not compatible with induction — copper cannot be read by an induction coil. An interface disc will work if induction is your only hob. |
| GTIN / barcode | 3574906131191 |
| Piece code | 613119 |
| Made in | Villedieu-les-Poêles, Normandy, France |
Care
- Hand washing is recommended for every Mauviel1830 piece. Detergents attack the coatings and the aluminium inside a multi-ply body.
- Copper tarnishes. That is the metal behaving normally, not a fault. Copperbrill restores the shine in a minute.
- On induction or ceramic, never go past two thirds of the hob’s power. Overheating is what warps a base and makes food stick, not the pan.
Made by Mauviel1830 in Villedieu-les-Poêles, Normandy. The Culinary Equipment Co is the appointed South African distributor.
Additional information
| Collection | |
|---|---|
| Material | |
| Size | |
| Type |
Only logged in customers who have purchased this product may leave a review.
La Manufacture
How this piece is made

The hand
Most of what leaves the workshop has been finished by someone who has done it for twenty years. Copper is spun over a wooden chuck, then checked by eye and by ear.

The fire
Bronze handles are cast in sand, filed, and riveted rather than welded. A rivet can be drilled out, which is why a handle can be replaced instead of the pan.

The same address
The workshop photographed in the early 1900s is the workshop still in use. Villedieu-les-Po\xC3\xAAles has worked copper since the twelfth century.
Made by Mauviel1830 in Villedieu-les-Po\xC3\xAAles, Normandy. The Culinary Equipment Co is the appointed distributor for South Africa.










Reviews
There are no reviews yet.